© 2006 PARASOUND PRODUCTS, INC.
Discontinued Products

Born of the original Zamp, Parasound's new-generation Zamp v.2 offers a host of new features including loop out jacks, ground lift, audio and DC triggering, and a sleek, smooth modern skin. Two discrete channels of 30 watts each offer the power to propel desktop, game, tv and distributed home audio systems way past "good enough" and far into the "WOW" zone. Start with just one; we'll be here when you want more!

FEATURES

  • 30 watts per channel into 8 Ω, less than 0.03% THD
  • 45 watts per channel into 4 Ω, 75 watts bridged into 8 Ω mono
  • 200 VA Toroid power transformer, 8,800 µF power supply filter capacitance
  • Gain controls and bridge switch on rear panel
  • Fully discrete direct coupled design, DC servo control
  • Headphone jack
  • LED indicators for AC present and operating mode
  • 12 volt DC auto turn-on trigger circuitry
  • Audio trigger with adjustable sensitivity 
  • Ground lift switch 
  • Looping line output connectors
  • 9 1/2" width front panel
  • Gold-plated RCA jacks
  • Gold-plated 5 way speaker terminals
  • 1 rack space height front panel
  • Two unit fastening hardware available for side-by-side rack mounting

SPECIFICATIONS

  • Continuous Power Output - Stereo:
       30 watts RMS x 2, 20 Hz - 20 kHz, 8 Ω, both channels driven;
       45 watts RMS x 2, 20 Hz - 20 kHz, 4 Ω, both channels driven
  • Continuous Power Output - Mono:
       75 watts RMS, 20 Hz - 20 kHz, 8 Ω, minimum impedance
  • Current Capacity:
       12 amperes peak per channel
  • Slew Rate:
        > 80 V/µsecond
  • Frequency Response:
        5 Hz - 100 kHz, +0/-3 dB at 1 watt
  • Total Harmonic Distortion:
        < 0.06 % at full power; < 0.01 % typical levels
  • IM Distortion:
       < 0.04 %
  • TIM:
        unmeasurable
  • Dynamic Headroom:
        > 1.5 dB
  • lnterchannel Crosstalk:
        > 80 dB at 1 kHz; > 60 dB at 20 kHz
  • Impedance:
       33 k Ω
  • Input Sensitivity:
       1 V
  • S/N Ratio:
        > 100 dB, full output Damping Factor: > 200 at 20 Hz
  • Dimensions:
       w 9 1/2" x h 1 3/4" x d 7", h 2 3/8" with feet
  • Net Weight:
       6 lb.

FAQ

  • The Zamp is so cute. Is it a serious amplifer?

    Why yes, it is! The Zamp incorporates a lot of the same technology that make all our amplifiers great. Torroidal transformers, discrete components, JFET inputs, BiPolar outputs, and high quality parts throughout.

DOWNLOADS