© 2006 PARASOUND PRODUCTS, INC.
Discontinued Products

With 85 watts per channel this amplifier is able to reproduce explosive transients, and deliver clear, intelligible dialog from a movie's soundtrack. All the goodness of a bigger Parasound amp, with far better sound than you could get from a receiver.

FEATURES

  • Direct coupled - no capacitors or inductors in signal path
  • DC Servo and relay protection circuits
  • High bias Class A/AB operation
  • 1 kVa Toroid power transformer with independent secondary windings for each channel, 68,000 F power supply filter capacitance
  • Independent power supplies for each channel
  • Input stages use hand matched complementary JFETs
  • 20 matched 15 amp, 50 MHz bipolar output transistors
  • AC present, standby/normal, current overload indicators
  • Rear mounted gain controls and rear handles
  • 12 volt DC automatic turn-on circuitry Gold-plated metal structure RCA input jacks
  • Gold-plated 5 way speaker binding posts
  • Custom designed removable IEC AC cord
  • Three rack space height front panel
  • Rack mounting adapter available (RMK-3)

SPECIFICATIONS

  • Continuous Power Output:
       85 watts RMS x 5, 20 Hz-20 kHz, 8 Ω
       125 watts RMS x 5, 20 Hz-20 kHz, 4 Ω
  • Current Capacity:
       30 amps peak per channel
  • Slew Rate:
       > 130 V/microsecond
  • Power Bandwidth:
       5 Hz-100 kHz, +0/-3 dB at 1 watt
  • Total Harmonic Distortion:
        <0.03 % at full power; < 0.01 % typical levels
  • IM Distortion:
        <0.03 %
  • TIM:
        Unmeasureable
  • Dynamic Headroom:
       > 1.5 dB
  • Interchannel Crosstalk:
       > 80 dB at 1 kHz
       > 60 dB at 20 kHz
  • Input Impedance:
       33 k Ω
  • Input Sensitivity:
       1 V for 28.28 V 1.2 V for full output
  • S/N Ratio:
       > 115 dB, full power, IHF A-weighted
  • Damping Factor:
       > 800 at 20 Hz
  • Dimensions:
       17" wide x 5 1/4" high x 16" deep (6" high with feet)
  • Power Requirements:
       110 Vac-120 Vac 750 Watts
  • Net Weight:
       41 lb

DOWNLOADS