© 2006 PARASOUND PRODUCTS, INC.
Discontinued Products

The PAL-80, PAL-65, and PAL-45 Precision Architectural Loudspeakers were developed using the finest driver and crossover components available. Countless hours of computer modeling were spent to insure accurate audio reproduction in a variety of installations where placement compromises are sometimes unavoidable. The PAL-80, PAL-65, and PAL-45 are virtually identical in operation and installation, except that the larger woofers provide more extended low frequency response and higher power handling capability.

FEATURES

  • 8" long throw, dual voice coil Kevlar cone woofer with efficient Strontium magnet, and dust screen
  • Dual 3/4" Aluminium dome tweeters that utlize ferrofluid for damping/cooling and powerful Neodymium magnets
  • Switchable mono or stereo operation
  • Three position tweeter attenuation control
  • 24k Gold "Constant Pressure" 10 AWG push terminals
  • Phase coherent, dual-mode crossover
  • Four-point, spring-loaded "dog-leg" mounting system
  • Acoustically transparent, fine mesh grill with paint shield
  • Parasound's 10 years parts, 5 years labor warranty

SPECIFICATIONS

  • Frequency Response:
        58 Hz-22 kHz +/- 2 dB
  • Nominal Impedance:
        6 Ω
  • Minimum Impedance:
        4 Ω
  • Sensitivity 1 Watt/1Meter:
        89 dB
  • Power Range:
        10-80 Watts
  • Woofer Size:
        6.5"
  • Cone Material:
        Kevlar
  • Surround Material:
        Mutli-layer Polyurethane
  • Tweeter Size/material:
        Dual 3/4" Aluminum Dome
  • Crossover Slope:
        12 dB per octave
  • Dimensions:
        Hole Cut-Out 7-3/4"
        Outer Edge of Frame 9"
  • Optional:
        NCK-3M New Construction Kit

DOWNLOADS