Zbreeze - Cooling Fan is designed to prevent stagnant hot air around nearby heat-producing components, drawing
hot air away from a heat-producing component, and into the rack’s general circulating air. It is not intended
to exhaust hot air from an entire rack or compartment full of equipment and should not be employed as a substitute
for general rack or cabinet forced air circulation. Temperatures can increase to dangerous levels around
closely-spaced components where local pockets of stagnant hot air are not exhausted by the overall air circulation
in an equipment rack or compartment.
Features
- Three large fans, ball bearing construction for long life
- Two Turn Off Modes, instant turn off or 10 minute delayed turn off
- Three user-selectable fan speeds
- High air flow, greater than 90 cubic feet / minute at max speed
- Three auto turn on modes, 12 Volt DC trigger, 120V AC or front panel button
- Auto turn on mode disables front panel power button
- Extra-quiet design, less than 33 dB noise
- Switchable 115v / 230v operation
- 1U half-rack space chassis
- (W x D x H): 9 ½" x 9" x 2 ¼" / 1 ¾" without feet
- (W X D x H): 242mm x 229mm x 57.5mm / 44.5mm w/o feet
Specifications
Air Flow
25 CFM, fan speed low
50 CFM, fan speed medium
75 CFM, fan speed high
Acoustical Noise
20 dB, fan speed low
35 dB, fan speed medium
50 dB, fan speed high
Fans, per fan (three total)
92mm Diameter
Double Ball Bearings
Brushless DC Axial Motors
AC Power Requirement
110 - 120 V / 220 -240 V, 50 - 60 Hz
1.5 watts standby; 8 watts maximum fan speed
Dimensions
9.5" Wide
10" Deep with connectors
2" High with feet, 1.75" panel only
241 x 254 x 50mm, 44.1mm panel only
Net Weight
3.6 lbs / 1.7 Kg