• THX Ultra2 certified
• 125 watts rms per channel into 8Ω, all channels driven
• 200 watts rms per channel into 4Ω, all channels driven
• 200 watts rms per channel into 2Ω, all channels driven
• 400 watts rms bridged into 8 Ω or 4Ω mono
• 35 amps peak current per channel
• Impedance selector switch for 2Ω operation
• Bridging switch for stereo or mono operation
• A/B speaker terminals with individual on/off
• 18dB/octave high pass filter, switchable 20Hz or 40Hz
• Fully discrete circuitry with toroid transformers
• Efficient, low heat design
• DC Servo and relay protection circuits
• Automatic on/off by DC trigger with looping output
• Automatic on/off by audio signal with adjustable sensitivity
• Gold-plated RCA input jacks, loop output jacks
• Heavy duty 24k gold-plated 5-way speaker terminals
• Rear-mounted gain controls; ground lift switch
• 115/230v selector on rear panel
• Standby, channel status, high temperature indicators
• 2u chassis; RMK22 rack mount kit available
• (W x D x H): 17.25” x 16” x 4.25 ” / 3.5” without feet

• Continuous RMS Power Output
  20 Hz - 20 kHz, Both Channels Driven
  125 watts x 2, 8 Ω
  200 watts x 2, 4 Ω
  200 watts x 2, 2 Ω
• Continuous RMS Power Output
  20 Hz - 20 kHz, Bridged Mono
  400 watts, 8 Ω
  400 watts, 4 Ω
• Current Capacity
  35 amps peak per channel
• Frequency Response
  20 Hz - 50 kHz, +0/-3 dB, 1 watt
• Dynamic Headroom
  1.3 dB
• Total Harmonic Distortion
  0.025% at full rated output
  0.015% at average listening levels
• IM Distortion
  0.05 %
• Transient IM Distortion
  Not measurable
• S/N Ratio
  114 dB at rated output, IHF A-weighted
  106 dB at rated output, unweighted
  93 dB at 2.828 V output, IHF A-weighted
  84 dB at 2.828 V output, unweighted
• Input Impedance
  33 k Ω
• Input Sensitivity
  1 V in for 28.28 V out, THX standard
• Inter-Channel Crosstalk
  85 dB, 1 kHz
  73 dB, 10 kHz
  67 dB, 20 kHz
• Damping Factor
  Over 150 at 20 Hz
• Auto Turn On - DC
  9 - 12V, 15 mA
• Auto Turn On - Audio
  1.2 mV - 12 mV, adjustable
  15 minute turn off delay
• AC Power Requirement
  110 - 120 V / 220 -240 V, 50 - 60 Hz
  3 watts standby; 550 watts full output
• Dimensions
  17-1/4" Wide
  16" Deep with connectors
  4-1/4" High with feet, 3-1/2" panel only
  437 x 406 x 107mm, 88.2mm panel only
• Net Weight
  27 lbs , 12.3 kg
• Rack Mount Accessory
  May be Purchased Separately RMK22

NC 2125 Manual

NC 2125 Brochure

Review from EnjoyTheMusic.com - November 2007