The D/AC-800 Digital-to-Analog Converter has been designed to extract greater musical detail from any digital source. If you are using it to upgrade your CD player you will find the D/AC-800 makes a world of improvement. You will enjoy more of the warmth and depth that has previously been associated only with the finest analog sources. The D/AC-800 sets new performance standards at its modest price. Its high quality parts, double power supply, high current drive analog stages, plus hookup and operating flexibility are superior to even many far more expensive D-A converters.

SPECIFICATIONS

• Frequency Response:
  5 Hz - 20 kHz, +/- 0.5 dB
• Signal to Noise Ratio:
  > 100 dB, 105 dB typical
• Dynamic Range:
  > 108 dB
• Channel Separation:
  > 100 dB @ 1 kHz
• Total Harmonic Distortion:
  < 0.005% @ 1 kHz
• Amplitude Linearity:
  > 92 dB; 95 dB typical
• Phase Linearity:
  +/- 0.2° @ 20 kHz
• Maximum Jitter:
  < 200 picoseconds RMS
• D-A Converters:
  Burr Brown PCM67, 1 bit - 18 bit hybrid
• Oversampling Rate:
  8 X (352.8 kHz)
• Digital Input:
  32 kHz, 44 kHz, 48 kHz, Consumer standard SPDIF
• Filters:
  NPC 8x interpolating digital filter
  two 2/3-order low-pass anti-imaging filters
• Absolute Polarity:
  0 deg or 180 deg switchable
• Digital Inputs:
  • 2 Coaxial:
    75 Ω RCA
  • TOSlink fiber optic:
    EIAJ Standard CP-340/RC-5720, 660 nm typical wavelength
  • ST module fiber optic:
    AT&T standard, 820 nm typical wavelength
• Outputs:
  Analog Line Out: 2.5 V nominal, 600 Ω, suitable load >= 10 k Ω
  Digital: 75 Ω RCA coaxial, 0.5 V peak-to-peak
• Power Supplies:
  2 separate transformers for digital and each analog circuit
• Power Requirement:
  120 V, 60 Hz, 15W; may be re-wired for 220 - 240 V, 50 Hz
• Dimensions:
  19" W x 3-3/8" H x 12" D
• Net Weight:
  11 lb.

Support and Downloads

DAC-800 Manual