• 110 Watts @ 8 or 4 Ohms
• Class D amplification by Pascal
• Burr-Brown 192kHz-24 bit DAC from the Halo P 5
• USB, Optical and Coax digital audio inputs
• 4 Analog audio inputs
• Phono input for MM or MC cartridges
• Pure analog signal path from input to output
• Analog bass management w/ variable 20-140Hz high pass crossover
• Subwoofer On/Off & level by remote control
• 80Hz low pass subwoofer output
• Full range mono output can be used for subwoofer or mono listening area
• Variable and fixed stereo preamp outputs
• Bypass input for surround sound or music streamer integration
• Default turn on volume memory
• Favorite volume memory with remote control button
• Input level matching (source volume offset)
• Bass, treble and balance adjustments by remote control
• Front panel LCD display with dimming
• 2-way RS232 w/ exact volume control & feedback
• Control4 Driver available
• Rename inputs to match connected source
• Front panel Aux input with12dB of additional gain
• Dedicated headphone amplifier
• Back-lit remote control with discrete buttons
• 12V trigger output
• Rear panel IR input
• 0.5w standby power consumption meets Energy Star & EU specs
• 1U rack mount kit available separately (Model RMK11)

Power Output - Both channels driven
(0.05% THD, 20 Hz - 20 kHz)
110 watts x 2 @ 4 Ω or 8 Ω (RMS)

Power Output - Both channels driven
(1% THD, 20 Hz - 20 kHz)
125 watts x 2 @ 4 Ω or 8 Ω (RMS)

Frequency Response:
20 Hz - 20 kHz, +0 / -0.05 dB
10 Hz - 80 kHz, +0 / -3 dB

Total Harmonic Distortion (20 Hz - 20 kHz):
< 0.05 %, (110 watts, 8 Ω)

Interchannel Crosstalk:
-75 dB at 20 kHz
-85dB at 1 kHz

Preamp Output:
250mv = 1V output
Total gain = 12 dB (volume set to 100)
Unity gain = Volume set to 76
Maximum output = 3.5V

Phono Stage Gain / Input Impedance:
MM: 40 dB / 47 k Ω
MC: 50 dB / 100 Ω

Line Level Input Impedance: 24k Ohms

Preamp Output Impedance: 470 Ohms

S/N Ratio – Line Inputs:
> 100 dB, input shorted, IHF A-weighted

S/N Ratio – Digital Inputs:
> 110 dB, input shorted, IHF A-weighted

DAC IC: Burr-Brown PCM1798

DAC Maximum Sampling Rates (PCM only):
USB: 96kHz - 24 bit
Optical: 192kHz - 24 bit
Coax: 192kHz - 24 bit

DC Trigger Output: 12 Vdc, 50mA

AC Power Requirement:
Standby: 0.5 watts
Idling: 15 watts (no music playing)
Typical: 50 watts (music playing)
Maximum: 300 watts
100-250 VAC 50/60 Hz (automatic)

Dimensions:
Width: 17.25" (438 mm)
Depth: 14.75" (375 mm)
Depth: 16.75" (425 mm) with cables connected
Height, with feet: 2.5" (63.5 mm)
Height, without feet: 1.75" (44.5 mm), 1U
Rack mounting requires RMK-11(sold separately)

Weight:
Net: 11.5 lbs (5.2 kg)
Shipping: 17.5 lbs (7.9 kg)

200 Integrated Manual

200Pre/Int RS232 Guide

200Pre/Int Control4 Driver

200Pre/Int Hex Codes

HIFI Sound Enthusiast, August 2020
"The Parasound exhibits airiness, which is rarely found in a system at this price. As a result, vocal tracks have this impression of the artists' breath as they sing, which adds to an already very realistic musical experience. Not to forget, the Parasound has this composure to it, completing the realism experience when listening to the NewClassic 200 integrated. Typically, I would hear such composure and realism with more expensive systems, so it is very impressive that Parasound can present such a sound with their budget-priced integrated."

Sound & Vision, March 2020
"Parasound's 200 Integrated is not just all of these but also audiophile and adaptable enough to get all the music out of your music, and all the functionality out of your system."

HI-FI Trends, November 2019
"With the NewClassic 200 Integrated, Parasound has done a masterful job of blending a quality pre-amp with a sweet-sounding amp section. It's neutral and transparent sound will make any speaker you hook up to it sound amazing!"

The Audio Beatnik - December 2019
"Right out of the box, I was impressed by what I heard. The clarity, detail, and grace were immediately apparent."